Leica Geosystems TPS1100 Professional Series - System Field Manual - Manual (Page 87)

87
Standard Coding
The TPS1100 keyboard is equipped with a coding key,
With the coding key, you can enter codes plus up to eight additional
informations from the following dialogs:
• from the main measurement dialog.
• from the measurement dialogs of all TPS1100 application
programs.
• from the station setup dialogs
The codes and informations are recorded independently of the
measurement data. You may record the code before or after you
have measured and recorded the target point data.
The standard use of the coding key allows the manual entry of
codes and informations.
You can select a codelist to be used with the coding key.
Codelists can be created:
• On the instrument (basic functionality).
• With the PC-software “Codelist Manager”. Please refer to the on-
line help of the Leica SurveyOffice Software for more
information.