KEYENCE IL Series - Manual (Page 110)

5-2 IL-E
5
Specif
ications
5-1
Specifications
*1 The classification is implemented based on IEC60825-1 following the requirement of Laser Notice
No.50 of FDA (CDRH).
*2 Value when measuring the KEYENCE standard target (white diffuse object).
*3 The F.S. of all of the models are as follows. IL-S025: ±5 mm, IL-S065: ±10 mm
*4 Is the value for when our standard object (white diffuse object) is measured at an average of 128
times and with a sampling rate of 1 ms from a standard distance.
*5 Value when the sampling rate is set to 2 ms or 5 ms.
Sensor Head
Model IL-S025 IL-S065
Mounting distance 25 mm 65 mm
Measurement range 20 to 30 mm 55 to 75 mm
Light source
Red semiconductor laser; wavelength 655 nm (visible light)
Laser Class Class 2 (FDA CDRH Part1040.10 *1 , IEC 60825-1)
Output 560 μW
Spot diameter
(at the reference distance) Approx.
25 x 1200 μm
Approx.
55 x 1700 μm
Linearity *2 *3
±0.075% of F.S.
(When used under 20 to 25 mm)
±0.05% of F.S.
(When used under 55 to 65 mm)
±0.1% of F.S.
(When used under 20 to 30 mm)
±0.075% of F.S.
(When used under 55 to 75 mm)
Repeatability *4 1 μm 2 μm
Sampling rate 0.33/1/2/5 ms (Variable to 4 levels)
Operating indicators
Laser emission warning indicator: green LED,
Analog range indicator: orange LED,
Reference distance indicator: red/green LED
Temperature characteristic *3 0.03% of F.S./°C 0.02% of F.S./°C
Environmental
resistance
Enclosure rating IP67
Ambient light *5 Incandescent lamp: 10000 lx
Ambient
temperature
-10 to + 50°C (No condensation and freezing)
Relative humidity 35 to 85% RH (No condensation)
Vibration 10 to 55 Hz, 1.5 mm double amplitude, 2 hours each for X, Y, and Z axes
Pollution degree 3
Material
Housing material: PBT, Metal: SUS304, Packing: NBR,
Lens cover: Glass, Cable: PVC
Weight Approx. 60 g Approx. 75 g