KEYENCE IL Series - Manual (Page 78)

4-2 Basic Settings and Advanced Settings
4-24
4
Setting V
ar
iou
s F
unct
ions
IL-E
Timing chart
„ Delay timer off
The delay timer is not used.
„ ON-delay timer
Time required to change the GO judgment output operation from OFF to ON is delayed for
specified time set on the timer. Also, time required to change the HIGH judgment output
and LOW judgment output operations from ON to OFF is delayed.
Reference
• The following are the timing charts when the output state of judgment
output is Normally Open (default value). ON/OFF is reversed for Normally
Close.
• "5. Output State" (page 4-14)
• The hysteresis is not taken into account in the following timing charts.
Note that the hysteresis affects the ON/OFF timing of the actual judgment
output.
• "9. Hysteresis" (page 4-26)
Time
Judgment value (P.V.)
HIGH side setting value
LOW side setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output
Time
Timer value
Judgment value (P.V.)
HIGH side setting value
LOW side setting value
ON
OFF
ON
OFF
ON
OFF
HIGH judgment output
GO judgment output
LOW judgment output