KEYENCE IL Series - Manual (Page 90)

4-2 Basic Settings and Advanced Settings
4-36
4
Setting V
ar
iou
s F
unct
ions
IL-E
Switching the bank with button operations
Press the S/T button while holding down the [MODE] button on the main screen.
The bank will switch, and the bank indicator [BANK0 to 3] will light according to the selected
bank.
Reference
• If the S button is pressed while holding down the [MODE] button, the
banks will change in the reverse direction.
• The banks cannot be switched with buttons if the bank switching method
is set to external input. If the banks are switched with buttons, the
following is displayed.








<While bank 0 is selected>
Press T while holding
down the [MODE] button.
BANK 0 lights
<While bank 1 is selected>
BANK 1 lights
<While bank 2 is selected>
BANK 2 lights
<While bank 3 is selected>
BANK 3 lights
Press T while holding
down the [MODE] button.
Press T while holding
down the [MODE] button.
Press T while holding
down the [MODE] button.
LASER
BANK 0 1 2 3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
GO
HOLD CALC CHECK $-.QE