KEYENCE IL Series - Manual (Page 26)

2-1 Mounting and Wiring the Sensor Amplifier
2-6
2
Installation and C
onnection
IL-E
Connecting power/Input-output cable (only for panel mount type)
Connect the power/input-output cable to the panel mount type main unit and connect the
input-output cable to the expansion units.
Sensor Amplifier Wiring
Point
• The power/input-output cable for the main unit has 12 core wires,
and the Input-output cable for the expansion units has 8.
• Power for the expansion units is supplied from the main unit.
• If the input-output is not used for the expansion units, cut the
cable at the connector base or terminate the wires properly for
future use.
Power/Input-output cable
To attach To remove