KEYENCE Visual KV Series - Manual (Page 37)

1.3 Device Configuration
3-13
1
1
Chapter 1 Programming
Relay 2008: Remains ON during only one scan when operation is started.
This relay can be used for an initial reset at the start of operation.
After one scan, this relay remains OFF.
Relay 2813: Sets the input time constant of the CPU.
While relay 2813 remains ON, the input time constant of a basic unit can be set
using the value of DM1940.
When operation is started, this relay sets all internal
utility relays used by the SFT instruction to OFF.
0000
1000
SFT
D
CLK
RES
2008
1100
1100
#00000
LDA
DM0000
STA
2008
When operation is started, this relay returns the current
value of DM0000 to 0.
KVNKA Chap 01P.p65 08.3.11, 11:49 AM 13