Aufladen des akkus, Charging the battery – Panasonic NVVX30EG User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

DEUTSCH

ENGLISH

Aufladen des Akkus

1

Den Akku anbringen.

•Den Akku auf die Linie O ausrichten, nach unten

drücken und gleichzeitig in Reilrichtung schieben.

(Zum Abnehmen in die entgegengesetzte

Richtung schieben.)

2

Das Netzkabel bis zum Anschlag in

die Buchse am Netzadapter und in

eine Netzsteckdose einstecken.

•Oie Stromanzeigelampe o leuchtet auf, und kurz

danach auch die Ladeanzeigelampe 0.

■ Ladeanzeigeiampe

Leuchtet:

Während des Ladevorgangs

Leuchtet nicht: Der Ladevorgang ist beendet. Für eine

optimale Ladung sollte nach Erlöschen
dieser Lampe jedoch noch weitere

2 Stunden lang aufgeladen werden.

■ Abnehmen des Akkus

Den Akku entgegen der im obigen Schritt 1

angegebenen Richtung schieben.

•Den Akku bei einer Raumtemperatur zwischen

10®C und 35 “C aufladen.

•Wenn der Netzadapter für die Stromversorgung des

Camerarecorders benutzt wird, kann er keinen Akku

aufiaden.

•Einen bereits vollständig aufgeladenen Akku nicht

erneut aufladen.

•Während des Einsatzes am Camerarecorder und

während des Aufiadens kann sich der Akku u.U.

stark en/värmen. Dies ist jedoch normal.

Charging the Battery

1

Attach the Battery.

•Align the Battery with line O and push it in the

direction of the arrow while holding it down.

(To remove the Battery, slide it in the opposite

direction.)

2

Securely connect the AC Mains Cable

to the AC Adaptor and an AC Mains
Socket.

•The Power Lamp @ lights and then the Charging

Lamp © lights, too.

■ Charging Lamp

Lit; During charging

Not lit Charging has finished. For an optimum charge,

continue charging for 2 hours after the lamp
goes out.

■ Removing the Battery

Slide it in the opposite direction of that indicated in Step

1 above.

•Charge the Battery at a room temperature between

10’C and 35°C.

•When the AC Adaptor is used to supply the Movie

Camera with power, it cannot charge the Battery.

•Do not charge the Battery again when it is already

fully charged.

•During recording or during charging, the Battery

may become warm. This is normal.

-

22

-

Advertising