Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 24)

xL Regional Settings Guide 21-3609E rev1.0 20
Outputs
Select Output?
◄ B001
►S000.07 ↓Ok
Pre-programmed Output
numbers like B001 will
display with their pre-
programmed code: e.g. S000.07. This is an output code that is programmed in Advanced Programming. Press ↓Ok to
edit the pre-programmed output using the following simplified output selections.
Select Output Select Group
(Program Section) Select Condition Select Operation
B001 – B128 System Fully On, In Alarm, Siren, Fire Cadence, Was In
Alarm Toggle, Normal, Time
Delay or Inverted
B001 – B128 Areas
Select Area # On, Stay 2, Stay 1, Stay 1 and 2, Off, Not On, Not
Off, Alarm, Was (In) Alarm Toggle, Normal, Time
Delay or Inverted
B001 – B128 Protection Points
Select Point # Normal, Not Normal, Day Not Normal, Nite (Night)
Not Normal, Alarm, Bypassed, Dly prepro (Delay
Preprocess), Tamper, Point Delay, Pos (Positive)
Confirm. Toggle, Normal, Time
Delay or Inverted
B001 – B128 Outputs
Select Output # Real OP (output) On, Equation is True, Manual
Command Toggle, Normal, Time
Delay or Inverted
B001 – B128 Modules
Select Module # On Line, Tamper, Comms Trbl, (Communications
Trouble), Battry Trbl (Battery Trouble), User
Logged On, Toggle, Normal, Time
Delay or Inverted
B001 – B128 Equipment Points
Select Point # System Tmpr (Tamper), Low/No Battery, AC
Failure, No Phone Line, Report Delay, Time Lost,
Time Change, Progr (Program) Edit , Progr
(Program) Error, Fuse Fail, Pod (Module) Trouble,
Pod Bat (Module Battery) Low, Pod Prg (Module
Program) Edit, Pod Prg Err (Module Program
Error), Oup Troubl (Output Trouble), HSC Troubl. Toggle, Normal, Time
Delay or Inverted
Simplified Regional Settings Output Defaults
Select Output Regional Setting
Default Select Group
(Program Section) Select Area, Point,
etc. Select Condition Select
Operation
B001 ( Relay 1 on
motherboard)
N America
(Advanced
programming
code: S000.07) System Fire Cadence Normal
B001 ( Relay 1 on
motherboard)
European
(S000.07) System Fire Cadence Normal
B001 ( Relay 1 on
motherboard)
Aus/NZ
(S000.06) System Siren Normal
B001 ( Relay 1 on
motherboard)
China/H.K.
(S000.07) System Fire Cadence Normal
B001 ( Relay 1 on
motherboard)
Netherlands
(S000.06) System Siren Normal
B001 ( Relay 1 on
motherboard)
Switzerland
(S000.07) System Fire Cadence Normal
B001 ( Relay 1 on
motherboard)
France
(S000.07) System Fire Cadence Normal
B002 ( Relay 2
on motherboard )
N America
(S000.05) System In Alarm Normal
B002 ( Relay 2
on motherboard )
European
(S000.05) System In Alarm Normal
B002 ( Relay 2
on motherboard )
Aus/NZ
(S000.57) System Fully On (Strobe) Normal
B002 ( Relay 2
on motherboard )
China/H.K.
(S000.05) System In Alarm Normal