Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 7)

21-3609E rev1.0 xL Regional Settings Guide 3
Manually calling the Director PC from the
LCD Keypad:
• This operation is for systems that can communicate
with the Director software.
• If the system configurations have been changed
example: by the customer to add a new user, it will
be necessary to update the Director configurations
for the system.
1) The system Unique ID and 3 rd Party Password
have to be programmed in the system if they were
not previously. Refer to “Entering and
Understanding Advanced Configurations” in this
guide and Advanced Configurations using the
keypad. To enable this feature, “Config Dial Out” is
set to “1” in Advanced program section S005:10.
2) Log on to the keypad as a system or service user.
3) Push the right arrow key for Menus.
Menu Options
◄ Director
► ↓Ok
4) Use the left and right
arrow keys to browse
the menu until “Director”
displays. Press Ok.
Director Options
◄ Update Cfg
► ↓Ok
5) “Director Options”,
“Update Config” will
display. Press Ok.
Updating Config
Please wait...... 6) “Updating Config,
Please Wait” will appear
and then change to
“Connecting”. Download Config
Connecting......
Download Config
In Progress.... – 7) When the system is
communicating with
Director, “In Progress”
will appear with a rotating bar next to it.
8) An asterisk: “ Â ” will appear between the hour and
the minute display on the time and date main
screen until the communication is complete.
NOTE:
This feature is not supported with an external
modem.