Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 97)

21-3609E rev1.0 xL Regional Settings Guide 93
NOTE: *2: If disabling reader, 0=disable card permanently, 1=disable card but set it so that it can be re-enabled later
at an enabling station, 2= disable card permanently and trigger auxiliary output , 3= disable card enable re-
enroll and trigger auxiliary output, 4 to 7 = not used, same as 1 (room for future expansion)
R001
È02, 05 Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
Reader Class Map
Schedule 00 = Treat as In Schedule
01 – 250 Schedule Enter a schedule for reader-
class restriction. 000
Group Number 00 = none, 1 – 63, Reader
Group Number. 00
In Schedule A 9
(yes) □ (no)
Whether Class A users can
enter during schedule 9
(yes)
In Schedule B 9
(yes) □ (no)
Whether Class B users can
enter during schedule 9
(yes)
In Schedule C 9
(yes) □ (no)
Whether Class C users can
enter during schedule 9
(yes)
Out of Schedule A 9
(yes) □ (no)
Whether Class A users can
enter outside of the sched. 9
(yes)
Out of Schedule B 9
(yes) □ (no)
Whether Class B users can
enter outside of the sched. 9
(yes)
Out of Schedule C 9
(yes) □ (no)
Whether Class C users can
enter outside of the sched. 9
(yes)
Anti-pass Back 9
(yes) □ (no)
Whether cards are to be
blocked against re-entry
before exiting first. † (no)
Log APB Violation
Only 9
(yes) □ (no)
Whether 'Anti-pass Back
violators' will be granted
entry. † (no)
Enable Class
Checking 9
(yes) □ (no)
Door class (A,B,C) checking,
on or off. 9
(yes)
R001 È03,06 Keypad Selections
(left to right on keypad screen) N America Example:
Name
Selections Description Regional Settings Default
Card Mode Schedule 00 = Use as In Schedule
setting
01 – 250 (Schedule)
Enter a schedule to allow cycling
between different 'card' modes
during the daytime, vs. after-
hours. 000
Reader Mode
Schedule 00 = Use as In Schedule
setting
01 – 250 (Schedule) Enter a schedule to allow cycling
between different reader modes
during the daytime, compared
with after-hours. 000
Card Mode In
Schedule 0=Card only,1= Card + PIN, 2=
Card or UID/ PIN,3= UID/ PIN
only The basic method that entrants
will have to use to gain entry at
this door—i.e., via access token
and/or by keying-in a PIN. 2
Card Mode Out of
Schedule 0=Card only,1= Card + PIN, 2=
Card or UID/ PIN, 3 = UID/ PIN
only
Same as ‘Card Mode In
Schedule’ 2
Reader Mode In
Schedule 0=Normal,1= Dual Custody, 2=
Escort, 3= Toggle Lock all user,
4= Toggle lock authorized. 5–
7=Future Sets whether a second user, or
initial escort will be required to
gain entry (while the schedule is
active). 0
Reader Mode Out of
Schedule 0=Normal,1= Dual Custody, 2=
Escort, 3= Toggle Lock all user,
4= Toggle lock authorized. 5–
7=Future
Sets whether a second user, or
initial escort will be required to
gain entry (outside of the
schedule). 0
000 · 000 · 2 · 2 · 0 · 0 ·
È Save R001 И 03