Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 71)

21-3609E rev1.0 xL Regional Settings Guide 67
Arming Station or
Keypad Reader
connected to Reader
LCD Keypad
9
(yes) □ (no) NOTE: Bi-colour LED must be
enabled for arming station
R001
È7 .
† (no)
Lockout In Schedule 9
(yes) □ (no)
Toggles the lockout between
inside of the chosen schedule (
9
), compared to outside of the
schedule ( □ ).
† (no)
Enabling Reader 9
(yes) □ (no)
† (no)
NOTE: Programming selections whose boxes are grey are not available for this version.
M0xx È08 Keypad Selections NOTE: “xx” represents the module number.
(left to right on keypad screen) N America Example:
WARNING:
These Access Control features are only available with the addition of the “Feature Expansion Board”.
Name Selections Description Regional Settings Default
Class Map Schedule 00 = Treat as In Schedule
01 – 250 Schedule 000
In Schedule A 9
(yes) □ (no)
† (no)
In Schedule B 9
(yes) □ (no)
† (no)
In Schedule C 9
(yes) □ (no)
† (no)
Out of Schedule A 9
(yes) □ (no)
† (no)
Out of Schedule B 9
(yes) □ (no)
† (no)
Out of Schedule C 9
(yes) □ (no)
† (no)
Enable Class
Checking 9
(yes) □ (no)
† (no)
M0xx È09 Keypad Selections NOTE: “xx” represents the module number.
WARNING: These Access Control features are only available with the addition of the “Feature Expansion Board”.
(left to right on keypad screen)
Name Selections Description Regional Settings Default
Card Mode Schedule 00 = Treat as In Schedule setting
01 – 250 (Schedule) 000
Reader Mode
Schedule 00 = Treat as In Schedule setting
01 – 250 (Schedule) 000
Card Mode In
Schedule 0=Card only
1= Card + PIN
2= Card or UID/ PIN
3= UID/ PIN only 0
Card Mode Out of
Schedule 0=Card only
1= Card + PIN
2= Card or UID/ PIN
3= UID/ PIN only 0
Reader Mode In
Schedule 0=Normal
1= Dual Custody
2= Escort
3= Future 0
Reader Mode Out of
Schedule 0=Normal
1= Dual Custody
2= Escort
3= Future 0
NOTE: Programming selections whose boxes are grey are not available for this version.
000 ·
†††††††
·····
È Save È ? M001 И 08