Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 63)

21-3609E rev1.0 xL Regional Settings Guide 59
A0xx È07 Automatic Arming NOTE: “xx” represents the area number.
Keypad Selections
(left to right on keypad screen) N America Example:
Name
Selections Description Regional Settings Default
N America 01 (1 sec)
European 00
U.K. ACPO
01 (1 sec)
Aus/NZ 01 (1 sec)
China/H.K. 00
Netherlands 00
Switzerland 00
Extended Automatic
Arming Delay Delay Table Safety margin delay before auto
arming begins.
France 00
N America
0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Extended Automatic
Arming Mode 0 – 7
0=Disable
1=Arm if Count <= Min, 2=Arm if
Inactive, 3=When Count<=Min OR
Inactive,
4=When Count <= Min AND
Inactive,
5,6,7 spare Automatically arms an area
based on counting users and/or
“area activity monitoring”.
France 0
N America
0
European 0
U.K. ACPO
0
Aus/NZ 0
China/H.K. 0
Netherlands 0
Switzerland 0
Extended Automatic
Arming Warning
Level
(Warning level when
arming)
0 – 3
0=Ignore,
1=Warn if users possibly left in
area at time of arming,
2=Block manually arming warn for
auto arming, if users left in.
3=Block all types of arming
(manual or auto) 1 = e.g. user count was not least
# at arming.
2 = e.g. by schedules or other
automated arming.
France 0
N America
1
European 1
U.K. ACPO
1
Aus/NZ 1
China/H.K. 1
Netherlands 1
Switzerland 1
Extended Automatic
Arming Level
0 = (Arm to Stay)
1 = (Arm to On)
Effective if “Extended Auto Arm
Mode” has an active setting.
France 1
N America
□ (no)
European □ (no)
U.K. ACPO □ (no)
Aus/NZ □ (no)
China/H.K. □ (no)
Netherlands □ (no)
Switzerland
□ (no)
Extended Automatic
Arming Only if
Schedule Not in
Effect □ (no)
Both in and out of schedule.
9
(yes)
Extended automatic arming when
out of schedule.
NOTE: These selections apply if
“Extended Auto Arm Mode” is
enabled and there is an area
schedule.
France □ (no)
01 · 0 · 0 · 1 ·
†
·········
È Save A001 И 07