Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 38)

xL Regional Settings Guide 21-3609E rev1.0 34
S002 È00 Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
N America 0
European 1
U.K. ACPO
2
Aus/NZ 3
China/H.K. 4
Netherlands 5
Switzerland 6
Operation Mode 0- Standard version
1- European with modem
support
2- UK (DD243) (ACPO)
3- Australia
4- China/Hong Kong
5- Netherlands
6- Switzerland
7- France
France 7
N America 03
European 04
U.K. ACPO
04
Aus/NZ 04
China/H.K. 04
Netherlands 04
Switzerland 04
Feature Set 1-14 from the following table. This setting determines the
system capacity.
France 04
Panel Feature Set Levels and Capacities:
Feature 01 02 03 04 05 06 07 08 09 10 11 12 13 14
Users 20 100 300 1000 1000 2000 4000 10,000 10.000 20,000 20,000 20,000 64,000 64,000
Doors 16 16 16 16 32 32 32 32 32 32 32 32 32 32
Schedule 50 50 50 100 100 100 100 250 250 250 250 250 250 250
Authority 30 30 30 100 100 100 100 500 500 500 1000 1000 1000 1000
Profile
60 60 60 200 200 200 200 750 750 1000 1000 1000 1000 1000
User Edit 10 10 10 50 50 50 50 100 100 100 100 100 100 100
Floor
Authority 0 0 0 0 50 50 50 100 100 100 100 100 100 100
Point 256 256 256 256 256 256 256 256 256 256 256 256 256 256
Outputs 128 128 128 128 128 128 128 128 128 128 128 128 128 128
Area
16 16 16 16 16 16 16 16 16 16 16 16 16 16
Log 1024 1024 1024 2048 2048 2048 2048 8192 8192 8192 16,364 16,364 65,536 32,768
Module* 24 24 24 24 24 24 24 24 24 24 24 24 24 24
Custom
Point
20 20 20 20 20 20 20 20 20 20 20 20 20 20
Equipment
Failure
Point 16 16 16 16 16 16 16 16 16 16 16 16 16 16
Holiday 50 50 50 50 50 50 50 50 50 50 50 50 50 50
Suite
Security
0 0 0 0 60 60 60 60 60 60 60 60 60 60
Floor 0 0 0 0 50 50 50 100 100 100 100 100 100 100
* Plus capacity for one temporary service LCD keypad for connecting to the module bus at the main controller.
• The “Feature Expansion Board” must be added to the system for Feature Set 4 and higher.
• Feature Set 5 and higher can only be configured using “Enterprise” level software. Prime level software is limited to
Feature Sets 1 – 4.