Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 25)

21-3609E rev1.0 xL Regional Settings Guide 21
B002 ( Relay 2
on motherboard )
Netherlands
(S000.57) System Fully On (Strobe) Normal
B002 ( Relay 2
on motherboard )
Switzerland
(S000.05) System In Alarm Normal
B002 ( Relay 2
on motherboard )
France
(S000.05) System In Alarm Normal
B003 (keypad) N America
(Advanced
programming
code: A001.01) Areas A01: OFFICE Function Key 1 on Area 1
1
st keypad.
Positive Trigger, 10 sec
delay.
NOTE:
A complex output
like this must be
programmed in
Advanced Programming.
Normal
B003 (keypad) European
(A001.01) Areas A01: AREA DE(SCRIP) Same as above. Normal
B003 (keypad) Aus/NZ
(A001.01) Areas A01: OFFICE Same as above. Normal
B003 (keypad) China/H.K.
(A001.01) Areas A01: AREA DE(SCRIP) Same as above. Normal
B003 (keypad) Netherlands
(A001.01) Areas A01: AREA DE(SCRIP) Same as above. Normal
B003 (keypad) Switzerland
(A001.01) Areas A01: AREA DE(SCRIP) Same as above. Normal
B003 (keypad) France
(A001.01) Areas A01: AREA DE(SCRIP) Same as above. Normal
B004 – B128
Undefined
N America
(?000.00)
B004 – B128
Undefined
European
(?000.00)
B004 – B128
Undefined
Aus/NZ
(?000.00)
B004 – B128
Undefined
China/H.K.
(?000.00)
B004 – B128
Undefined
Netherlands
(?000.00)
B004 – B128
Undefined
Switzerland
(?000.00)
B004 – B128
Undefined
France
(?000.00)