Interlogix XL LCD Keypad Plus Regional Settings Guide - Manual (Page 43)

21-3609E rev1.0 xL Regional Settings Guide 39
S003 È00 Primary Card Format—Site Code Checking
WARNING: S003 È 00 – S003 È 05 Access Control related selections are only available with the addition of
the “Feature Expansion Board”.
Keypad Selections (left to right on keypad screen) Example:
Name
Selections Description Regional Settings Default
Check for Site Code 9
(yes)
□
(no)
Whether or not primary-format tokens
must have a specific site code to be
granted entry. † (no)
Site Code Position 1 – 40 The position of the 1st digit for the
site/system code on these access
tokens.
Position value changes depending on
site code length. 06
Site Code Length 1 – 16 The length of the site code for primary-
format tokens (number of digits).
Site code when represented as a digital
#. Can not exceed 4 digits. 10
S003 È01 Primary Card Format—Site Codes
Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
1st Site Code Value 0000 – 9999 The 1st of up to three site/system codes
that can be encoded within access
tokens to be used at the site. 0000
2nd Site Code Value 0000 – 9999 The 2nd of up to three site/system codes
that can be encoded within the access
tokens to be used at the site. 0000
3rd Site Code Value 0000 – 9999 The 3rd of up to three site/system codes
that can be encoded within the access
tokens to be used at the site. 0000
If site code checking is enabled for the primary card/token format cards encoded with any one of up to three site code values can be used at the
site. (All other cards will be globally denied access.)
S003 È02 Primary Card Format—Version Number
Keypad Selections (left to right on keypad screen)
Name Selections Description Regional Settings Default
Check for Version
No. 9
(yes)
□
(no)
Whether or not primary-format tokens
will be checked for a current version
number. † (no)
Version No. Position 1 – 40 The position of the 1st digit for the
version number on these access tokens. 02
Version No. Length 1 – 16 The length of the version number for
primary-format tokens (number of digits). 04
This feature requires V1.5 door/elevator controller firmware.
S003
È03 Primary Card Format—Basic Settings
Keypad Selections
(left to right on keypad screen) Example:
Name
Selections Description Regional Settings Default
ID Number Position 01 – 40 The position of the 1st digit for the ID
number on primary-format access
tokens. 16
†
· 06 · 10 ···········
È Save S003 И 00
16 · 20 · 36 · 8 · 2 ·······
И Save S003 И 03