Chapter 2. outline of functions – Nor-Cal SDC15 Controller User Manual
Page 27
2-5
Chapter 2. OUTLINE OF FUNCTIONS
Handling Precautions
• For details about display and setup contents of the operation display,
bank selection display, and bank setting display, refer to
6-1 List of Operation Displays (on page 6-1),
6-2 List of Parameter Setting Displays (on page 6-3)
and
6-3 List of Setup Setting Displays (on page 6-8).
In the lists shown above, a bank belonging to each setting item is
described.
• When pressing the [<] key with the [para] key kept pressed instead of
pressing of the [para] key in the operation display or setting item
display mode, various displays and settings can be operated in the
reverse order. However, the operation becomes invalid that both the
[para] key and [<] key are kept pressed for 2 sec. or longer.
Display when the power
is turned ON.
Keep the [para]
key pressed for
2 sec. or longer.
PV/SP display
Press the [para] key.
MV display
Other display and setup
(Operate the [para] key
repeatedly.)
Press the [para] key.
Press the [para] key.
Mode bank selection
SP bank selection
Operation display
Press the [mode]
key.
Press the [<] key.
Off.
The mode indicator
is lit sequentially
from the left.
Off.
No key operation for 3 min. or more.
No key operation for 3 min.
or more.
Press the [mode] key.
mode
pv
sp
mode
pv
sp
mode
pv
sp
mode
pv
sp
mode
pv
sp
mode
pv
sp
rdy
man
ev1
ev2
ev3
ot1
ot2
para
mode
pv
sp
The mode indicators are lit sequentially
from the left during a period of 6 sec. after
the power has been turned ON while both
the upper display and lower display are off.
When all mode indicators have been lit, the
display is changed to the operation display.
Bank selection
PV range type
setup
Press the [para] key.
Temperature unit
setup
Other display and setup
(Operate the [para] key
repeatedly.)
Press the [para] key.
Press the [para] key.
Bank setting display
The display and setup status shown above are examples for
explanation. Therefore, some displays or settings are not shown
actually according to the model and/or setup contents.
Keep the [para] key pressed for 2 sec. or longer.
Press the [para] key.
Press the [ ] or [ ] key.
<
<
Press the [para] key.
Press the [ ] or [ ] key.
<
<
Press the [para] key.
Press the [ ] or [ ] key.
<
<
Other banks
(Operate the [para] key
and the [ ] or [ ] key
repeatedly.))
<
<