Altera CPRI IP Core - Manual (Page 211)

December 2013 Altera Corporation CPRI MegaCore Function
User Guide
G. Porting a CPRI IP Core from the
Previous Version of the Software
This appendix describes how to port your CPRI IP core from the previous version of
the Quartus II software. In some software releases, new parameters are added to the
IP core. In those cases, the instructions include the information required to set the new
parameters to backward compatible values.
To upgrade your CPRI IP core that you developed and generated using the Quartus II
software v13.0, to the IP core v13.1, use the IP Upgrade process provided in the
Quartus II software, or manually perform the following steps:
1. Open the Quartus II software v13.1.
2. On the File menu, click Open Project.
3. Navigate to the location of the .qpf file you generated with the Quartus II software
v13.0.
4. Select the .qpf file and click Open.
5. Open the existing IP core for editing in the MegaWizard Plug-In Manager.
6. Click Finish.
7. Proceed with simulation and compilation of your design.