Comtech EF Data LPOD-R - Manual (Page 56)

LPOD-R Outdoor Amplifier / Block Up Converter (BUC) MN-LPODR
Introduction Revision 1
1–6
1.5 Summary of Specifications
1.5.1 Characteristics
IF Input Frequency
Note 1
RF Output Frequency
950 – 1525 MHz 5.850 – 6.425 GHz
950 – 1750 MHz 5.850 – 6.650 GHz (optional)
950 – 1825 MHz 5.850 – 6.725 GHz (optional)
965 – 1265 MHz 6.725 – 7.025 GHz
950 – 1450 MHz 7.900 – 8.400 GHz
950 – 1450 MHz 14.00 – 14.50 GHz
950 – 1750 MHz 13.75 – 14.50 GHz (optional)
Model Psat (Typical) P1dB (Guaranteed)
Note 1
Ku-Band Units
PS.5-10Ku 40 dBm (10 W) 39 dBm (8 W)
PS.5-15Ku 42 dBm (16 W) 40.75 dBm (12 W)
PS1-20Ku 43 dBm (20 W) 42 dBm (16 W)
PS1-32Ku 45 dBm (32 W) 44 dBm (25 W)
PS1-40Ku 46 dBm (40 W) 45 dBm (25 W)
PS1.5-50Ku 47 dBm (50 W) 46 dBm (40 W)
PS1.5-60Ku 48 dBm (60 W) 47 dBm (50 W)
C-Band and/or
X-Band Units
PS.5-15C 41 dBm (15 W) 40 dBm (10 W)
PS1-25C,X 44 dBm (25 W) 43 dBm (20 W)
PS1-32C,X 45 dBm (32 W) 44 dBm (25 W)
PS1-40C,X 46 dBm (40 W) 45 dBm (32 W)
PS1-50C,X 47 dBm (50 W) 46 dBm (40 W)
PS1-60 C,X 48 dBm (60 W) 47 dBm (50 W)
PS1.5-75 C,X 48.6 dBm (75 W) 48 dBm (60 W)
PS1.5-80 C,X 49 dBm (80 W) 48.5 dBm (70 W)
PS1.5-100 C,X 50 dBm (100 W) 49 dBm (80 W)
PS1.5-110 C,X 50.4 dBm (110 W) 49.5 dBm (90 W)
PS1.5-125 C,X 51 dBm (125 W) 50 dBm (100 W)
Notes:
1. Allow 1 dB degradation from 13.75 to 14.0 GHz and 6425 to 6725 MHz.
Gain Min (Typical)
PS .5 60 (65 dB)
PS 1, 1.5 70 (75dB)
Input Power Supply Requirements
90-264 VAC, 47-63 Hz, Power Factor Corrected, .96 (PS 1, 1.5
only)(48 VDC optional)
Max IF Input level (no damage) +10 dBm