Comtech EF Data LPOD-R - Manual (Page 99)

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet-based Remote Product Management Revision 1
4–13
4.4.5.2 Admin | SNMP
The Administrator must use this page to manage LPOD-R SNMP (Simple Network Management
Protocol) settings. Refresh the page to see the latest data.
Figure 4-3. Admin | SNMP Page
• Simple Network Management – Use the drop-down list to select Enabled or Disabled.
• The Read Community String and Write Community String fields can be any combination of
characters and a length of 0 to 20 characters.
o
Read Community String factory default is public.
o
Write Community String factory default is private.
• SNMP Contact – Enter the contact data.
• SNMP Name – Enter the name.
• SNMP Location – Enter the location.
• Enable Authentication Trap – Use the drop-down list to select Enabled or Disabled.
• The Administrator can assign up to two SNMP Trap IP addresses.
• Trap Version – Use the drop-down list to select the version.
• The SNMP Trap Community String field can be any combination of characters and a length
of 0 to 20 characters. The factory default for the SNMP Trap Community String is comtech.
Click Submit SNMP to save any changes.