Comtech EF Data LPOD-R - Manual (Page 98)

LPOD-R Outdoor Amplifier / Block Up Converter MN-LPODR
Ethernet-based Remote Product Management Revision 1
4–12
• Admin, Read/Write, and Read Only Names and Passwords – The factory defaults for these
names/passwords are:
o
Admin comtech/comtech
o
Read/Write opcenter/1234
o
Read Only monitor/1234
Click Submit Access to save any changes.
Webpage Timeout
The Webpage Timeout sets the time period that can pass before the Web Server Interface pages
time out.
• Use the drop-down list to select 5 minutes (default) or 8 hours.
• Click Submit.
The Status | Status page automatically refreshes once every ten seconds, and resets
the timeout counter.
SNTP
• Server IP Address – Specify the SNTP server IP Address.
• State - Use the drop-down to select Enable or Disable.
Click Change SNTP Params to save these settings.