Flowserve MX Limitorque - Manual (Page 162)

Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
154
7.1 Declaration of Conformity
Application of Council Directive(s)
89/336/EC; EMC Directive
89/392/EC; Machinery Directive
2003/10/EC; Airborne Noise Directive
94/9/EC; ATEX Directive
Standard(s) to which Conformity is Declared
Machinery; EN 60204-1
EMC - Emissions; EN 50081-1&2, EN 55011, CFR 47
Immunity; EN 50082-1&2, IEC 801-3 & IEC 801-6
ESD; IEC 801-2
EFT/Bursts; IEC 801-4
Surge Immunity; IEC 801-5, ANSI/IEEE C62.41
Mains (power) Harmonics; MIL-STD-462, Method CSO1 & CSO2
Airborne Noise; MIL-STD-740-1, Table 1, and EN 60204
ATEX
Electrical Apparatus for Potentially Explosive Atmospheres;
General Requirements EN 50014:1997(A1 and A2)
Flameproof “d” EN 50018:2000(A1)
Increased Safety “e” EN 50019: 2000
Essential Health and Safety Requirements PrEN 13463-5:2003
Non-Electrical Equipment for Potentially Explosive Atmospheres
EN 13463-1:2001
Manufacturer’s Name
Limitorque, a division of Flowserve Corporation
Manufacturer’s Address
5114 Woodall Road
Lynchburg, VA 24502
Importer’s Name
Limitorque International
Importer’s Address
Euro House
Abex Road
Newbury
Berkshire, RG14 5EY
United Kingdom
Type & Description of Equipment
Valve Actuators
Model Number
MX Series
NOTE: Tested with Limitorque products only and with standards
applicable at time of tests.
I, the undersigned, hereby declare that the equipment specified
above conforms to the above Directive(s) and Standard(s). List as
follows:
(Signature)
Earnest Carey
(Full Name)
Manager, Product Management
(Title)
Flowserve Limitorque
5114 Woodall Rd., Lynchburg VA 24502
(Place)
December 9, 2005
(Date)
Andy Hole
(Authorized EU Representative)
7
Regulatory Information