Figures – Flowserve MX Limitorque User Manual
Page 6
Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
iv
Figures
Figure 2.1 – Typical MX Actuator
3
Figure 2.2 – MX Nameplate
5
Figure 2.3 – Oil Fill/Plug Locations (MX-05 through -40)
7
Figure 2.4 – Oil Fill and Drain Locations (MX-85, -140, and -150)
7
Figure 4.1 – Motor (MX-05, -10, -20, and -40)
19
Figure 4.3 – Motor, Support Plate and Adapter (MX-150)
24
Figure 4.4 – Declutch (MX-05 and -10)
25
Figure 4.5 – Declutch (MX-20 and -40)
26
Figure 4.6 – Declutch (MX-85, -140, and -150)
27
Figure 4.7 – Top-Mounted Handwheel (MX-05, -10, -20, and -40)
32
Figure 4.8 – Side-Mounted Handwheel (MX-10 and -20)
35
Figure 4.9 – Side-Mounted Handwheel (MX-85, -140, and -150)
36
Figure 4.10 – Side-Mounted Handwheel with SGA (MX-40)
40
Figure 4.11 – Side-Mounted Handwheel With SGA (MX-85, -140, and -150)
41
Figure 4.12 – Type A1 Thrust Base (MX-05, -10, -20, and -40)
53
Figure 4.13 – Type A1 Thrust Base (MX-85) - F16 Flange
54
Figure 4.14 – Type A1 Thrust Base (MX-85, -140, and -150) - F25 Flange
55
Figure 4.15 – Type B1 Torque Base (MX-05, -10, -20, and -40)
57
Figure 4.16 – Type B4 Baseplate (MX-05, -10, -20, and -40)
59
Figure 4.17 – Type B4 Baseplate (MX-85, -140, and -150)
60
Figure 4.18 – Worm Shaft (MX-05, -10, -20, and -40)
63
Figure 4.19 – Drive Sleeve (MX-05 and -10)
67
Figure 4.20 – MX-20 and -40 Drive Sleeve
70
Figure 4.21 – MX-85, -140, and -150 10:1 and 13:1 ratios
71
Figure 4.22 – Handwheel Adapter (MX-05)
77
Figure 4.23 – Handwheel (MX-05)
77
Figure 4.24 – Handwheel Adapter Assembly
81
Figure 4.25 – Handwheel Worm Gear Assembly
82
Figure 4.26 – MX-20 and -40 Clutch and Ring Components
87
Figure 4.27 – MX-85, -140, and -150 Clutch and Ring Components
87
6 Spare and Replacement Parts
150
6.1 Guidelines for Recommended Spare Parts
150
6.1.1 Wear Components
150
6.1.2 Bearings, O-rings, and Seals
150
6.1.3 Critical Components
151
6.2 Recommended Spare Parts for MX Actuators
151
6.2.1 Commissioning and Startup
151
6.2.2 Short-Term Duty
151
6.2.3 Long-Term Duty
151
6.2.4 Severe Duty
152
6.3 Other Concerns
152
7 Regulatory Information
154
7.1 Declaration of Conformity
154