5c 5d – Flowserve MX Limitorque User Manual
Page 99
Advertising
91
Limitorque MX Maintenance and Spare Parts FCD LMENIM2314-00 – 07/08
flowserve.com
STEP 5B, C, D (MX-85, -140, AND -150)
CONTINUED
Fit the clutch ring (#1-37) over the drive sleeve.
With the roller (#15-2) down and holding
the latch (#15-7) 90° from free position. See
picture 5c.
NOTE: The clutch ring socket head cap screw
(#15-9) must fit into hole in housing to keep
ring from rotating. See picture 5d. See warning
Note in Section 4.14.2, Step 8.
5c
5d
Housing
Hole for
Clutch Ring
Screw for
Anti-
Rotation of
Clutch Ring
Assembly
STEP 6
Slide clutch (#1-38) over drive sleeve assembly.
6
1-38
STEP 7
Slide spring (#1-39) over drive sleeve
assembly.
7
1-39
Advertising
This manual is related to the following products: