Fluke Biomedical 190M - Manual (Page 119)

109
Chapter 8
Specifications
Introduction
Performance Characteristics
Fluke Biomedical guarantees the properties expressed in
numerical values with the stated tolerance. Specified non-
tolerance numerical values indicate those that could be
nominally expected from the mean of a range of identical
ScopeMeter test tools.
The test tool meets the specified accuracy 30 minutes and
two complete acquisitions after power on. Specifications
are based on a 1-year calibration cycle.
Environmental Data
The environmental data mentioned in this manual are
based on the results of the manufacturer’s verification
procedures.
Safety Characteristics
The test tool has been designed and tested in accordance
with Standards EN/IEC 61010-1:-2001, EN/IEC 61010-
031:2002+A1:2008 Pollution Degree 2 (According to CE
marking), ANSI/ISA-61010-1 (82.02.01):2004, CAN/CSA
C22.2 No. 61010-1-04 (including approval), Safety
Requirements for Electrical Equipment for Measurement,
Control, and Laboratory Use.
This manual contains information and warnings that must
be followed by the user to ensure safe operation and to
keep the test tool in a safe condition. Use of this
equipment in a manner not specified by the manufacturer
may impair protection provided by the equipment.