Fluke Biomedical 190M - Manual (Page 46)

190M Series Medical ScopeMeter
Users Manual
36
Making Multimeter Measurements
(Model 190M-2)
The screen displays the numeric readings of the
measurements on the meter input.
Making Meter Connections
Use the two 4-mm safety red ( ) and black (COM)
banana jack inputs for the Meter functions. (See Figure
14.)
CAT III 1000V
CAT IV 600V
CAT II 1000V
Figure 14. Meter Connections
Measuring Resistance Values
To measure a resistance, do the following:
1 Connect the red and black test leads from the
4-mm banana jack inputs to the resistor.
2
METER
Display the METER key labels.
3 F1 Open the MEASUREMENT menu.
4 Highlight Ohms.
5 ENTER Select Ohms measurement.