Fluke Biomedical 190M - Manual (Page 23)

Using the Scope and Meter
Navigating a Menu
1
13
Navigating a Menu
The following example shows how to use the test tool’s
menus to select a function. Subsequently follow steps
1 through 4 to open the scope menu and to choose an
item.
1
SCOPE
Press the SCOPE key to display
the labels that define the present
use for the four blue function keys
at the bottom of the screen.
Note
To hide the labels for full screen view, press the
CLEAR key. Press the CLEAR key again to show
the labels again. This toggling enables you to
check the labels without affecting your settings.
2 F4 Open the Waveform Options
menu. This menu is displayed at
the bottom of the screen. Actual
settings are shown on a yellow
background.
SCOPE ENTER
ENTER ENTER ENTER
1
3b 3b 3b
3a
3a
Figure 4. Basic Navigation
3a
3
b
ENTER
Use the blue arrow keys to
highlight the item. Press the blue
ENTER key to accept the selection.
The next option will be selected.
After the last option the menu will
be closed.
Note
Pressing the blue arrow keys lets you to step
through a menu without changing the settings.
To exit the menu at any moment press F4
(CLOSE).