Using replay, zoom and cursors, About this chapter, Replaying the 100 most recent scope screens – Fluke Biomedical 190M User Manual

Page 59: Chapter 3

Advertising
background image

49

Chapter 3

Using Replay, Zoom and Cursors

About this Chapter

This chapter covers the capabilities of the analysis
functions Cursor, Zoom, and Replay. These functions
can be used with one or more of the primary functions
Scope, TrendPlot or Scope Record.

It is possible to combine two or three analysis functions. A
typical application using these functions follows:

First

replay the last screens to find the screen of

special interest.

Then

zoom in on the signal event.

Finally, make measurements using the cursors.

Replaying the 100 Most Recent Scope
Screens

When you are in scope mode, the test tool automatically
stores the 100 most recent screens. When you press the

HOLD

key or the

REPLAY

key, the memory contents are

frozen. Use the functions in the

REPLAY

menu to “go back

in time” by stepping through the stored screens to find the
screen of your interest. This feature lets you capture and
view signals even if you did not press

HOLD

.

Advertising