Installing the usb drivers – Fluke Biomedical 190M User Manual
Page 150
190M Series Medical ScopeMeter
Users Manual
A-2
Installing the USB Drivers
To install the USB drivers, do the following:
1
Connect the Fluke Biomedical 190M Series Medical
ScopeMeter to the PC. You can plug the USB in and out (hot-
swap) when both the computer and the instrument are on. It is
not required to power off.
When there is no driver loaded for the Fluke Biomedical 190M
Series Medical ScopeMeter, Windows will show that there is
New Hardware detected, and the Wizard for installing new
hardware opens.
Depending on your computer settings, Windows may ask for
permission to search the Windows Update website for the latest
revision. When you have an active internet connection, select
“Yes,” then click “Next.” To install drivers from the CD-ROM or
from a location on the hard drive select “No, not this time.”