Fluke Biomedical 190M - Manual (Page 82)

190M Series Medical ScopeMeter
Users Manual
72
Saving and Recalling
You can:
• Save screens and setups to internal memory, and
recall them again from memory. The test tool has 15
‘screen and setup’ memories, 2 ‘record and setup’
memories, and 1 screen image memory. See also
Table 1.
• Save up to 256 screens and setups to a USB memory
device, and recall them again from memory.
• Name saved screens and setups according to your
own preferences.
• Recall screens and recordings to analyze the screen
image at a later date.
• Recall a setup to continue a measurement with the
recalled operating configuration.
Notes
Saved data are stored in non-volatile Flash
memory.
Not saved instrument data are stored in RAM
memory and will be kept at least 30 seconds
when the battery is removed when no power is
supplied via the BC190 power adapter.
Table 1. Test Tool Internal Memory
Mode Memory locations
190M-2 30x 10x 9x
190M-4 15x 2x 1x
METER Setup +
1 screen - Screen image
SCOPE Setup +
1 screen Setup +
100 replay
screens Screen image
SCOPE REC - Setup +
record data
Screen image
TRENDPLOT - Setup +
trendplot data
Screen image
In persistence mode the most recently written trace will be
saved, not all persistence traces.
In the displayed file list of stored screens and setups the
following symbols are used:
setup + 1 screen
setup + replay screens/record data
setup + trendplot data
screen image (imagexxx.bmp)