Fluke Biomedical 190M - Manual (Page 43)

Using the Scope and Meter
Analyzing Waveforms
1
33
Analyzing Waveforms
You can use the analysis functions CURSOR , ZOOM and
REPLAY to perform detailed waveform analysis. These
functions are described in Chapter 3: “Using Cursors,
Zoom and Replay.”
Making Automatic Meter Measurements
(Model 190M-4)
The test tool offers a wide range of automatic meter
measurements. You can display four large numeric
readings: R
EADING 1 … 4. These readings are selectable
independently, and the measurements can be done on the
input A, B, C or input D waveform. In METER mode the
waveforms are not displayed. The 20 kHz HF rejection
filter (see Working with Noisy Waveforms on page 27) is
always on in the METER mode.
Selecting a Meter Measurement
To choose a current measurement for input A, do the
following:
1
METER
Display the METER key labels.
2 F1 Open the Reading .. menu.
3 F1 Select the reading number to be
displayed, for example
READING 1