Fluke Biomedical 190M - Manual (Page 149)

A-1
Appendix A
Installing USB Drivers
Introduction
The 190M Series Medical ScopeMeters come with a USB
interface (connector: USB type “B mini”) for
communication with a computer. To be able to
communicate with the test tool, first load drivers onto the
computer. This document describes how to install the
drivers on a Windows XP computer. Installing on other
Windows versions will be similar.
Drivers for Windows 7, Vista and Windows XP are
available from the Microsoft Windows Driver Distribution
Center, and can be downloaded if your computer is
connected to the internet.
The drivers have passed Windows Logo Verification and
are signed by Microsoft Windows Hardware Compatibility
Publisher. This is required for installation on Win 7.
Note:
The 190M Series Medical ScopeMeters require
that two drivers be loaded in sequence onto the
computer.
• First, install the Fluke 190M Medical
ScopeMeter USB driver.
• Second, install the driver for the Fluke
190M Medical ScopeMeter USB serial
port.
Both of these drivers must be installed in
order to communicate with the Medical
ScopeMeter.