Fluke Biomedical 190M - Manual (Page 58)

190M Series Medical ScopeMeter
Users Manual
48
10
ENTER
Select the 0.12V or 1.2V trigger
level and accept all recorder
options.
11 Apply a trigger signal to the red and black ext.
trigger banana inputs.
During recording samples are continuously saved in deep
memory. The last twelve recorded divisions are displayed
on the screen. Use View All to display the full memory
contents.
Note
To learn more about the Single Shot trigger
function, see Chapter 4 “Triggering on
Waveforms”.
Figure 22. Triggered Single Sweep Recording
Analyzing a TrendPlot or Scope Record
From a TrendPlot or Scope Record you can use the
analysis functions CURSORS and ZOOM to perform
detailed waveform analysis. These functions are described
in Chapter 3: “Using Replay, Zoom and Cursors”.