Fluke Biomedical 190M - Manual (Page 84)

190M Series Medical ScopeMeter
Users Manual
74
All memories in use
If no free memory locations are available a message pops
up that proposes to you to overwrite the oldest data set.
Do one of the following:
If you don’t want to overwrite the oldest data set,
-
press F3 then delete one or more memory
locations, and save again.
If you want to overwrite the oldest data set,
-
press F4
Editing names
To name the screen+setup according to your own
preferences, continue from step 4 as follows:
5
F1
Open the EDIT NAME menu
6
F2
Skip to a new character position.
7
ENTER
Select another character and press
ENTER to accept your choice.
Repeat 6 and 7 until done.
8
F1
Accept the name and return to the
SAVE AS menu.
9
ENTER
Highlight OK SAVE to save the
actual screen using the edited
name.
To modify the default name generated by the test tool,
continue from step 8 as follows:
9
ENTER
Highlight SET DEFAULT to save
the new default name.
10
ENTER
Highlight OK SAVE to save the
actual screen using the new default
name.