Gasboy SiteOmat Maintenance Manual - Manual (Page 130)

126
SiteOmat Setup and Maintenance Manual – MDE 4817G
6-7. BACKUP
Click on the Backup button to display the Setup Backup screen (see Figure 6-9), which enables
users to define the database backup.
Backup can be enabled by clicking on the Enable automatic backup of database checkbox, or
disabled by leaving it blank.
Backup is performed as follows:
Figure 6-9. Setup Backup
a. Delta backup, which only saves the changes made from the last backup. If the Enable
automatic backup of database
checkbox is selected, the system creates a delta or
incremental backup at the intervals determined in the Time of backup section
b. Full backup which save the entire database on a user-determined basis
Users are required to define the backup schedule in the Time of backup section.
The Backup Time is the time of day in hours and minutes after midnight set to perform the actual
backup.
Backup can be defined on a Weekly or Monthly basis. In both cases the backup day should be
selected from the drop-down lists.