Gasboy SiteOmat Maintenance Manual - Manual (Page 86)

82 SiteOmat Setup and Maintenance Manual – MDE 4817G
4-4.11. Page 11 – Series 1000 Upgrade
In this page (see Figure 4-21), enter existing Series 1000 card/key formats required to enable
automatic identification and authorization. This page is displayed only in cases where the Series
1000 upgrade option on Page 4 was selected.
Figure 4-21. SiteOmat Setup Wizard, Page 11
Proceed as follows:
1. Edit the Card Format Definition table, defining the following parameters for each Field:
a. Select the Field Types using the drop-down lists containing the following options:
CARD
, EMP, VEH, DEPT
b. Enter the Field Size (the maximum total size is 12 digits)
2. Edit the Fleetkey Format Definition table, defining the following parameters for each
Field:
a. Select the Field Types using the drop-down lists containing the following options:
EMP
, VEH, DEPT, ACCT
b. Enter the Field Size (the maximum total size is 20 digits)
3. Click Next to continue