Gasboy SiteOmat Maintenance Manual - Manual (Page 72)

68 SiteOmat Setup and Maintenance Manual – MDE 4817G
Also, the user can define if a printer is available for each selected pedestal.
Proceed as follows:
Figure 4-12. SiteOmat Setup Wizard, Page 3
1. Select the Controller model using the radio buttons
2. Select the Printer Available checkbox if the pedestal includes a printer
3. Select the number of Extension Boxes or ICR+ units (if any) and select the Printer
Available
checkbox if the ICR PLUS pedestal includes a printer
NOTES
The system supports a maximum of ten peripherals.
If a higher number is entered, the text box is marked
in red and the Wizard displays the following error
notification: Controller numbers cannot exceed
10
.