Gasboy SiteOmat Maintenance Manual - Manual (Page 259)

255 SiteOmat Setup and Maintenance Manual – MDE 4817G
9-5. GPRS MODEM
Before configuring the OrCU to work in GPRS mode, the customer should contact a Cellular
Provider and ask for:
• Static IP address
• APN name
Perform the following steps:
1. Go to Setup Modem (see Figure 9-9)
2. Choose Connection Mode ‘GPRS’ from the combo box
3. Click Set Modem Settings
4. Reboot the OrCU
Figure 9-9. Modem Setting Screen
9-6. 3G MODEMS CONNECTIONS
9-6.1. Overview
The OrCU supports 3G cellular connection through a Router and a 3G adaptor (see Figure 9-10).
The OrCU is "Online" and can be connected at all times using a fix IP address.
The fix IP address is supplied by the ISP (Internet Serves provider).