Gasboy SiteOmat Maintenance Manual - Manual (Page 54)

50 SiteOmat Setup and Maintenance Manual – MDE 4817G
Figure 3-8. Time Setup Screen
3-5.3. Password
To change the password to the OrCU Administration site, proceed as follows:
1. Click on the Password navigation button
2. The OrCU Password screen appears (see Figure 3-9) Enter the selection in the New
Password
and Confirm Password text boxes
3. Click on the Change Password button to save the changes
Figure 3-9. OrCU Password Screen
3-5.4. Serial/ Modem
To set up the serial port connection, proceed as follows:
1. Click on the Serial/Modem navigation button. The OrCU Serial/Modem Settings screen
appears (see Figure 3-10)
Select the option Use port for External Devices in cases where the serial port is connected
to the TLG, or to the Weight & Measures Security Plug (refer to APPENDIX F)
2. In cases where the serial port is used for modem connection, follow the instructions
provided in paragraph 9-4.2