Gasboy SiteOmat Maintenance Manual - Manual (Page 37)

33 SiteOmat Setup and Maintenance Manual – MDE 4817G
Table 2-2. Serial (HEX) Addresses for Devices
Device Default Address Starting Serial
Address
Ending Serial
Address
OrTR (Orpak Tag Reader) 0x61 0x61 0x69
OrPT (Orpak Payment Terminal) 0x46 0x46 N/A
Printer 0x70 0x70 0x74
Journal Printer N/A 0x1 N/A
Wireless Gateway 0x31 0x31 N/A
NOTE
The HEX address configured in the controller must
match the device HEX address. Otherwise, the
device is not loaded.
An example of address configuration for Islander PLUS and CFN controllers is displayed in
Figure 2-2 and Figure 2-3 respectively; examples for an Extension Box and ICR PLUS in
Figure 2-4 and Figure 2-5.