Gasboy SiteOmat Maintenance Manual User Manual
Page 132
128
SiteOmat Setup and Maintenance Manual – MDE 4817G
6-9. UI TEXT LOCALIZATION
The system enables the customer to translate/modify the translation of the GUI.
This feature is activated when logging in as Administrator Translator (refer to paragraph 5-3) in
cases where the system language was set to other than English on the first Page of the Setup Wizard
(refer to paragraph 4-4.1) or on the Global Parameters screen (refer to paragraph 6-2).
In order to modify the translation of the text displayed on a specific screen, press CTRL+ALT+T.
The Text Translation dialog box appears (see Figure 6-11). Enter the new translation of the field's
text in the corresponding row of the Translated Text column.
Click Save to close the dialog box and apply the changes, or click Cancel to exit the dialog box
without saving the changes.
Figure 6-11. Text Translation Dialog Box