Gasboy SiteOmat Maintenance Manual - Manual (Page 295)

291 SiteOmat Setup and Maintenance Manual – MDE 4817G
NOTE
If a device entered at the OrPT does not match the
card format information loaded in the Wizard setup,
including the System ID, number of fields and Field
size and Product Authorization, the OrPT will
display “ Device not Found” or “Auth – Wrong
Product” or “Decline”
5. Now go to the FHO and select the Stations screen, select the station you want to download
the Devices from. Verify the FHO is connected to the Station selected.
6. Observe the Status and Push Pending parameters while the Device data is being pushed to
the FHO (see Figure G-7 and Figure G-8)
Figure G-7. Station Status – Success
Figure G-8. Station Status – Pulling Remote
7. In FHO Device database, observe the Device data base is being populated automatically
(see Figure G-9)