Gasboy SiteOmat Maintenance Manual - Manual (Page 58)

54 SiteOmat Setup and Maintenance Manual – MDE 4817G
5. If the controller is configured for mechanical pumps, verify that the Weight & Measures
security plug is installed. The following reminding message appears (see Figure 3-12)
Figure 3-12. W&M Security Plug Message
Click OK to proceed.
NOTE
Before upgrading SiteOmat, please contact your
agent for the latest version.
To install the SiteOmat, proceed as follows:
1. Click on the SiteOmat navigation button. The OrCU Install SiteOmat screen appears (see
Figure 3-13)
Figure 3-13. Install SiteOmat Screen
2. Click on the Browse button and select the SiteOmat installation file
3. Click Upload
4. Wait until the upload is finished (this process may take few minutes)