Gasboy SiteOmat Maintenance Manual - Manual (Page 65)

61 SiteOmat Setup and Maintenance Manual – MDE 4817G
4-2. SOFTWARE REQUIREMENTS
MS Silverlight plug-in must be installed on the PC prior to running the Wizard.
The plug-in can be downloaded from: http://www.microsoft.com/getsilverlight/Get-
Started/Install/Default.aspx
Silverlight downloading and installation is described in 4-3.1
4-3. ACCESSING THE WIZARD
To access the wizard, proceed as follows:
1. Open Internet Explorer 7.0 or higher
2. Type the default SiteOmat IP address:
https://192.168.1.104/
3. Login as Administrator. At initial startup, default username is Admin and default password
is Admin
NOTE
When first logging in, the administrator is required
to change the password in order to meet the
customer's security needs.
4. On first installation, when no previous setup exists and Microsoft Silverlight plug-in has
already been installed, the first page of the SiteOmat Setup Wizard (see Figure 4-10)
appears. In cases where Silverlight plug-in is missing, the Wizard displays a download link
(see Figure 4-3). If a previous setup is found, the Setup screen appears (see Figure 4-1). In
this case, click on the Wizard button to open the Wizard