Gasboy SiteOmat Maintenance Manual - Manual (Page 61)

57 SiteOmat Setup and Maintenance Manual – MDE 4817G
3-6.4. PAIS
To install the driver for a third party clearing system, proceed as follows:
1. Click on the PAIS navigation button. The OrCU Install PAIS screen appears (see
Figure 3-17)
Figure 3-17. Install PAIS Screen
2. Click on the Browse button and select the PAIS installation file
3. Click Upload
4. Wait until the upload is finished (this process may take few minutes)
5. Click Install to install the PAIS driver
6. Reboot the system (see paragraph 3-4.4)
3-6.5. Operating System (BSP)
To upgrade a previously installed controller operating system, proceed as follows:
1. Click on the Operating System navigation button. The OrCU Install Operating System
(BSP) section is displayed (see Figure 3-18)
2. Click on the Browse button and select the BSP installation file (the file is named as
BSPX.XXSPXX)