Gasboy SiteOmat Maintenance Manual - Manual (Page 290)

286 SiteOmat Setup and Maintenance Manual – MDE 4817G
APPENDIX G
DISCOVERY MODE
G-1. GENERAL
Software version 6.4.x.x and above has a feature that allows SiteOmat to accept Devices
automatically prior of having these Devices loaded into the FHO database. This is an alternative
method of importing Device information into the FHO Devices database, rather than manual entry
or importing from an excel spread sheet.
NOTE
In order for this feature to operate correctly it is
necessary that you have access and knowledge of the
following information from the system being
replaced (i.e.: Series1000 System) Magnetic Card
or Key Layout, System ID, Product Limitations &
Authorizations
, Number & Name of ID fields,
Single
or Dual Card or Key operation.
G-2. SETUP
To allow the discovery mode to function properly you need to set up and configure the SiteOmat in
the two following locations:
1. Setup  Advanced  Global  Advanced  Select the Discovery Mode checkbox and
click Modify (see Figure G-1)