Gasboy SiteOmat Maintenance Manual - Manual (Page 191)

187 SiteOmat Setup and Maintenance Manual – MDE 4817G
 Copy all (uncompressed) files
to /usr/local/orpak/BOS/DB
 For each file (FILENAME) run the following # sqlite3
DATA.DB < FILENAME
 Run the files in ascending order of dates (first comes
first) older date first!
7. Verify that the files and folders permissions are correct
 # cd /usr/local/orpak/BOS
 # chown –R fcc:fcc *
c. FCC DB
1. Before FCC can start, it DB must be properly set – do not start operating the
station and making transactions or any other operation before completing this
procedure
2. Reboot the OrCU to load all components
3. Verify that the BOS is operational and the setup looks OK – (browse to the
SiteOmat)
4. From Admin menu run Sysinit
5. From Admin menu run Sync FCC - this command verifies that the FCC DB
indexes are matched
6. From Admin menu run Reload – this must be the last action