Gasboy SiteOmat Maintenance Manual User Manual
Page 53
49
SiteOmat Setup and Maintenance Manual – MDE 4817G
3-5.1. Networking
SiteOmat Station Controller has a default IP address, which may be changed to suit the
requirements of the local network.
NOTE
The default IP address at LAN 1 is 192.168.1.104.
To set up the network, proceed as follows:
1. Click on the Networking navigation button
2. Follow the steps described in paragraph 9-3.3
3-5.2. Time
To adjust the Controller’s date and time to match the regional date and time, proceed as follows:
CAUTION
Verify that all station activities are ceased before
modifying clock settings.
1. Click on the Time navigation button
2. The Time Setup screen appears (see Figure 3-8). Enter the Date and Time in the
corresponding text boxes
3. Select the Time Zone from the drop-down list
4. Click on the Change time settings button to save the changes
5. Reboot the system (see paragraph 3-4.4) to apply the changes