Gasboy SiteOmat Maintenance Manual - Manual (Page 251)

247 SiteOmat Setup and Maintenance Manual – MDE 4817G
9-3.2. Router Settings
In order to have access to OrCU from the WAN when using a router, a NAT (Network Address
Translation) or port forwarding is required to be set for ports 443 and 22.
Figure 9-2. Port Forwarding Rules
NOTE
Browsing to the OrCU from remote is done via the
public IP address.
9-3.3. OrCU Settings
1. Browse to the OrCU admin screen (IP=xx.xx.xx.xx:8090)
2. Click Network. The Networking screen is displayed (see Figure 9-3)
3. Set the OrCU LAN2 IP address according to the router class settings (e.g. 10.0.0.1)
4. Set the "Default Getaway" as the router internal IP address (e.g. 10.0.0.46)