Gasboy SiteOmat Maintenance Manual - Manual (Page 158)

154
SiteOmat Setup and Maintenance Manual – MDE 4817G
Figure 7-23. Pump Server Flow
To define a Pump Server, select the Pump Servers tab. The Setup Pump Server dialog box appears.
(see Figure 7-24).
Enter its Name, then select its Bus. All servers supported in SiteOmat communicate in Pump Server
frame (protocol) only (refer to paragraph 7-3). Click on the ellipsis (…) button to display the Buses
screen, and select the bus.
The Model field is inactive, and the default selection is always Pump Server.
After defining a new pump server, the specific features of that Pump Server must be defined.
Save the pump server by clicking on the New button before setting the Additional Features.