Hypertherm HT200LHF-200 Volt HySpeed - Manual (Page 163)

APPENDIX A: ARGON-HYDROGEN CUTTING AND GOUGING
HySpeed HT2000LHF
Instruction Manual
a-3
6
Argon-Hydrogen plasma gas torch lead – Argon-Hydrogen Manifold to Torch
Part No. Length
024355 12 in (305 mm)
024354 10 ft (3 m)
024368 20 ft (6.2 m)
024369 30 ft (9.1 m)
024370 40 ft (12.4 m)
024443 50 ft (15 m)
024467 75 ft (23 m)
1. Turn all plasma and shield gas supply
tanks
OFF
.
2. Disconnect the 4X1 end of the valve cluster
cable from the power supply off-valve
cable.
3. Disconnect the plasma gas hose that
comes from the torch and goes to SV5.
4X1 end of the
valve cluster cable
(disconnect from the
power supply off-valve
cable)
Plasma gas hose
(disconnect at this
point)
Figure a-4 Converting the HT2000LHF Torch for Argon-Hydrogen Cutting – 1 of 2